BusterCYL

Stats
Weight = 20g
Length = 22cm

Materials
1x Crayola Supertip (1 corps)
2x DongA Computer Sign Pen (2 caps + 1 backcap)
2x Zebra Airfit (1 grip + 2 tips)

Construction

1. Empty the body of Crayola Supertips

2. Place backcap Dong -A on the body

3. Cut the grip of Zebra Airfit 2

4. Place the 2 pieces on each of caps Dong -A

5. 2 Place the tips of Zebra Airfit on each of caps

6. Place 2 caps on the body

Categories:

Neon Waterfall mod

Tutorial made by vortex

Stats
COG=COP
Weight = Same as Waterfall mod
Lenght = Same as Waterfall mod

Materials
2 Dr.Grips (Grips)
2 Uniball Signo (tips)
2 Reynolds 094 fluo (caps, Body)

Construction

1. Empty the body of your neon Reynolds 094 ( cut the front and remove inktube).

2. Put R094 caps on both extremities of R094 body.
3. Put Signo tip on R094 caps.
4. Put Dr.Grip grip above caps.

Categories:

Mushuu mod

Mushuu mod by Mayu

Stats: 
Length: 20cm
Weight: 14g
COG: COG=COP
Writing-Mechanism: N/A
Estimated cost: N/A

Materials
Doppelfasermaler 2x (4x Caps)
Pic 01 – Pic 02
Comssa 2x (Caps)
Airfit Grip 1x
G3 2x (Tips)
SuperPirate Body 1x (if you want color use Pelikan Corella Duo)
HGG/RSVP Grip 1x
2x2 (or more) Rings of Sailor

Construction
1. Gather Materials - Doppelfasermaler 2x | Comssa 2x | Airfit Grip 1x | G3 2x | SuperPirate Body 1x | HGG/RSPV Grip 1x | 2x2 (or more) Rings of Sailor

2.Keep the good stuff! - Make sure to seperate the dünn (thin) and dick (thick) caps!

3. Gather your tools! - Hammer | Knife | Lighter | Tape | spare big Tip or similar

4. Dünn (Thin) Caps - Prepare these 3 parts

5. Hammer Time - hammer out the lil stuff inside the 2 caps!

6. Remove the lil parts - you have sexy holed out caps now!

7. Dick (thick) caps, prepare everything and light up your knife, we have to cut of the last biggest ring of the 2 left caps

8. We only need these 2 Rings, remove the rest

9. Add the Rinf onto the Comssa Caps, make sure the cutting edge is facing out

10. Cut the Airfit Grip in 2 parts, make sure to cut exactly in the middle of the grip!

10a.  Should look like this now

Categories:

Watergel mod

Watergel mod by Mayu

Stats
Length: 20-21cm
Weight: 14g
COG: COG=COP
Writing-Mechanism: N/A
Estimated cost: N/A

Materials
2x Uni-ball Signo Broad (Tips and Caps)
1x Dong-A Comssa (Backplug)
1x Super Pirate (Body)
2x Anyball Grip (2x2 and 2x5 Rings)
2x Raynolds 094 (Caps)

Basic tools: Art knife, Lighter, Sand Paper

Construction
1. Gather your Pens - Super Pirate 1x | Signo Boread 2x | Raynolds 094 Caps 2x | Anyball Grip 2x | Comssa Backcap 1x (not in the Picture!)

2. Disassemble the Pens and keep the shown stuff (Comssa Backplug NOT in the picture!)

3. Cut the Anyballs like this: 2 - 4 - 5 Keep 2 and 5!

4. Push the Signo Tips into the Raynolds Caps!

5. Cut the Signo Broad Caps @3,3cm

6. File down the sharp edges on the Signo Caps

7. Push the Signo Cap on the Raynolds Caps; add the Anyball Grips like shown (5&2 Rings)

8. Push a Comssa Backplug into the SP Body (may tape it a bit!) and add the Raynolds Caps

9. Your very own WaterGel Mod!

Categories:

Bonkura KT

image from TEK

Stats

Lenght : 20.5 cm
Weight : 20 g
COG:  Yes 

Materials

2 Miffies m Melanies (Body and caps)
3 Sailor Gel (Grips)
2 Dr.grips (Tips)

Construction

1. Empty MnM
2. Put 2 caps on it
3. Put the grips (defends on how you prefer but for the original mod look at the image above)
4. Put the tips like on the image
5. Done

Categories:

Lokubo mod

Stats

Length: 17.6 cm
Weight: heavier than RSVP MX
COP location: about the center of the pen mod

Materials

Pentel HGG DX (grip)
Pentel RSVP (body, cap, 2 grips)
Uni-Ball Signo (metal tip)

Construction

1. Remove the clip from the RSVP cap.
2. Take a RSVP grip, soap/alcohol/oil it and shove it ALL the way back into the RSVP cap.
3. Reverse the ink tube.
4. Put an insert in the RSVP barrel.
5. Remove the HGG DX grip.
6. Remove Signo metal tip.
7. Cut part of the plastic RSVP tip until there is about 2mm of plastic before the grip.
8. Screw Signo tip right onto the cut RSVP tip.
9. Slide HGG DX grip over the metal tip and some of the RSVP grip so the DX grip covers the flat part of the Signo tip.

Source

Categories:

Menowa* mod

Credits go to Menowa* for making the mod.
This was written by AfroSquared
Images go to Froggy and some other random person.

Pen List:
x2 Old Supertips
x1 Bic Round Stic
x2 Dr Grip Tips
x2 Airblanc Tips
x2 Black Color Twin Caps
x1 Pink Anyball
x1 Skyblue Anyball
x2 Black Anyballs
x3 Penwish Black Rings
x1 HyperJell Grip

Equipment List:
G3 Rubber-Stopper (To hollw out caps optional)
Drill (to hollow out caps optional)
White Tap
Utility Knife

1. First Prepare the body. Cut each Old Supertip to approximately 6cm-7cm in length. Cut down the Bic Round Stick Barrel to 4cm - 6cm (optional length) and put a Black Penwsih Ring in the outside. Then put each end of the supertip in the cut down Bic Round Stick. Then put the two other Black Rings on the ned of each side. The Body is done.

2. Hollow out the black CT caps. You can hollow it out by using a drill or something to poke it through (G3 Rubber Stopper can be used). Once hollowed, get some White tape and make a tape cut with it. The white tape should have been cut with a Utility Knife into little strips beforehand. Simply, place them onto the caps.

4. Cut 1cm off of a HyperJell Grip and cut the 1cm piece into 2 to make two 0.5cm grips. Put one of the cut hyperjell grips AROUND the other to make one whole 0.5 cm grip. 

5. Place the new 0.5cm HyperJell grip around the Airblanc tip and place the Airblanc tip into the Dr Grip Tip. The grip of the HyperJell should be visible.

6. Place the tip package inverted into the hollowed out CT caps. 

7. To keep the tips inverted, put the black, skyball and pink anyballs on the caps. Cut 1 ring of the coloured anyball then 2 rings then cut 1 ring and 2 rings of the black anyball and replaced with the coloured anyball. Place the grips on the caps.

Categories:

Fusion mod

Fusion mod replica by Vôre-Tèx

Categories:

Alva G3

Categories:

Saturn mod

Categories: