Menowa* mod

Credits go to Menowa* for making the mod.
This was written by AfroSquared
Images go to Froggy and some other random person.

Pen List:
x2 Old Supertips
x1 Bic Round Stic
x2 Dr Grip Tips
x2 Airblanc Tips
x2 Black Color Twin Caps
x1 Pink Anyball
x1 Skyblue Anyball
x2 Black Anyballs
x3 Penwish Black Rings
x1 HyperJell Grip

Equipment List:
G3 Rubber-Stopper (To hollw out caps optional)
Drill (to hollow out caps optional)
White Tap
Utility Knife

1. First Prepare the body. Cut each Old Supertip to approximately 6cm-7cm in length. Cut down the Bic Round Stick Barrel to 4cm - 6cm (optional length) and put a Black Penwsih Ring in the outside. Then put each end of the supertip in the cut down Bic Round Stick. Then put the two other Black Rings on the ned of each side. The Body is done.

2. Hollow out the black CT caps. You can hollow it out by using a drill or something to poke it through (G3 Rubber Stopper can be used). Once hollowed, get some White tape and make a tape cut with it. The white tape should have been cut with a Utility Knife into little strips beforehand. Simply, place them onto the caps.

4. Cut 1cm off of a HyperJell Grip and cut the 1cm piece into 2 to make two 0.5cm grips. Put one of the cut hyperjell grips AROUND the other to make one whole 0.5 cm grip. 

5. Place the new 0.5cm HyperJell grip around the Airblanc tip and place the Airblanc tip into the Dr Grip Tip. The grip of the HyperJell should be visible.

6. Place the tip package inverted into the hollowed out CT caps. 

7. To keep the tips inverted, put the black, skyball and pink anyballs on the caps. Cut 1 ring of the coloured anyball then 2 rings then cut 1 ring and 2 rings of the black anyball and replaced with the coloured anyball. Place the grips on the caps.

Categories: