ZM mod

Source

ZM mod is made by Vôre-Tèx

Stats

• 21 CM
• 19.6GR

Materials 

• 2 Zebra Mildliner Double-Sided Highlighters (2 bigs caps, 1 little cap, 1 barrel) 1
• 2 Dr.Grip ( 2 tips, 1 grip) 2
  

Construction

1. 

2.

3.

4.

5.

6.

7.

Please check the author of this amazing mod, Vôre-Tèx

Categories:

NIKoo’s G3

Stats

• Length : 19cm
• Weight ; 16g
• COG = COP

Materials

1. 1 Jedo ( Tip )
2. 3 HGG ( 2 Grips + 3 Tips )
3. 1 Signo ( Tip )
4. 1 HyperJell ( Tip )
5. 1 Metallic G3 ( Everythings)
6. 1 Air Blanc ( Grip )
7. 1 Anyball ( Grip )
8. 1 Dr.Grip G-Spec ( Grip )

Construction

1. Turn with the patafix and tape the 3 tips of the front of the HGG mod over that of Jedo.
2. Cut into 2 pieces the grip of White Air (size unspecified), put on with 2 streaks Anyball between the first grip of HGG
3. Put this on top of the tips (add the song to grip HyperJell first if you do not want to see undergrip).
4. Now the cap: Enter the Signo tip of the second HGG grip and a small ring HyperJell inside. Cut a piece Grip G-Spec and put it on the course.
5. Assemble it.

Source

Categories:

Meet Vôre-Tèx our Penmodder of the Month!

Vôre-Tèx, or VT, is an FPSB member since March 2009. 
At the age of 14, he discovered Penspinning in September 2008 and started penmodding in April 2009.
At his beginning, he created basic mods, until his 2 years of modding. After that, he made 4 series mods on 2 years. It's called : Greek Gods, the Sephiroth, the Seasons and Famous French mods. During these 2 years, he made mods just for fun. He used the term of "Pure Modding" : create mods just to see it and not to spin it.
Thanks to that, he managed to refine his modding style and to understand how to use pens. 
In 2013, he participated at the PenModding World Tournament, and forfeited cause to a bad organisation/communication between organizer and candidates.
In 2014, he conceptualized the Triple Sided mod : mod with 3 frameworks ; and made a review about it.

In 2015, he conceptualized a mod called CYCoG : a Single Sided mod with many Centers of Gravity so with many ways to spin it.

Vôre-Tèx and Syrti having eating potatoes

He's one of the FPSB's moderator since the end of 2012. After 6 years and thanks to this practice, he'd like to become a product designer. Actually, he very likes penmodding. It's his passion. He's keeping to create mods, personals or already invented.

Vôre-Tèx

Categories:

BusterCYL

Stats
Weight = 20g
Length = 22cm

Materials
1x Crayola Supertip (1 corps)
2x DongA Computer Sign Pen (2 caps + 1 backcap)
2x Zebra Airfit (1 grip + 2 tips)

Construction

1. Empty the body of Crayola Supertips

2. Place backcap Dong -A on the body

3. Cut the grip of Zebra Airfit 2

4. Place the 2 pieces on each of caps Dong -A

5. 2 Place the tips of Zebra Airfit on each of caps

6. Place 2 caps on the body

Categories:

Neon Waterfall mod

Tutorial made by vortex

Stats
COG=COP
Weight = Same as Waterfall mod
Lenght = Same as Waterfall mod

Materials
2 Dr.Grips (Grips)
2 Uniball Signo (tips)
2 Reynolds 094 fluo (caps, Body)

Construction

1. Empty the body of your neon Reynolds 094 ( cut the front and remove inktube).

2. Put R094 caps on both extremities of R094 body.
3. Put Signo tip on R094 caps.
4. Put Dr.Grip grip above caps.

Categories:

Mushuu mod

Mushuu mod by Mayu

Stats: 
Length: 20cm
Weight: 14g
COG: COG=COP
Writing-Mechanism: N/A
Estimated cost: N/A

Materials
Doppelfasermaler 2x (4x Caps)
Pic 01 – Pic 02
Comssa 2x (Caps)
Airfit Grip 1x
G3 2x (Tips)
SuperPirate Body 1x (if you want color use Pelikan Corella Duo)
HGG/RSVP Grip 1x
2x2 (or more) Rings of Sailor

Construction
1. Gather Materials - Doppelfasermaler 2x | Comssa 2x | Airfit Grip 1x | G3 2x | SuperPirate Body 1x | HGG/RSPV Grip 1x | 2x2 (or more) Rings of Sailor

2.Keep the good stuff! - Make sure to seperate the dünn (thin) and dick (thick) caps!

3. Gather your tools! - Hammer | Knife | Lighter | Tape | spare big Tip or similar

4. Dünn (Thin) Caps - Prepare these 3 parts

5. Hammer Time - hammer out the lil stuff inside the 2 caps!

6. Remove the lil parts - you have sexy holed out caps now!

7. Dick (thick) caps, prepare everything and light up your knife, we have to cut of the last biggest ring of the 2 left caps

8. We only need these 2 Rings, remove the rest

9. Add the Rinf onto the Comssa Caps, make sure the cutting edge is facing out

10. Cut the Airfit Grip in 2 parts, make sure to cut exactly in the middle of the grip!

10a.  Should look like this now

Categories:

Watergel mod

Watergel mod by Mayu

Stats
Length: 20-21cm
Weight: 14g
COG: COG=COP
Writing-Mechanism: N/A
Estimated cost: N/A

Materials
2x Uni-ball Signo Broad (Tips and Caps)
1x Dong-A Comssa (Backplug)
1x Super Pirate (Body)
2x Anyball Grip (2x2 and 2x5 Rings)
2x Raynolds 094 (Caps)

Basic tools: Art knife, Lighter, Sand Paper

Construction
1. Gather your Pens - Super Pirate 1x | Signo Boread 2x | Raynolds 094 Caps 2x | Anyball Grip 2x | Comssa Backcap 1x (not in the Picture!)

2. Disassemble the Pens and keep the shown stuff (Comssa Backplug NOT in the picture!)

3. Cut the Anyballs like this: 2 - 4 - 5 Keep 2 and 5!

4. Push the Signo Tips into the Raynolds Caps!

5. Cut the Signo Broad Caps @3,3cm

6. File down the sharp edges on the Signo Caps

7. Push the Signo Cap on the Raynolds Caps; add the Anyball Grips like shown (5&2 Rings)

8. Push a Comssa Backplug into the SP Body (may tape it a bit!) and add the Raynolds Caps

9. Your very own WaterGel Mod!

Categories:

Bonkura KT

image from TEK

Stats

Lenght : 20.5 cm
Weight : 20 g
COG:  Yes 

Materials

2 Miffies m Melanies (Body and caps)
3 Sailor Gel (Grips)
2 Dr.grips (Tips)

Construction

1. Empty MnM
2. Put 2 caps on it
3. Put the grips (defends on how you prefer but for the original mod look at the image above)
4. Put the tips like on the image
5. Done

Categories:

Lokubo mod

Stats

Length: 17.6 cm
Weight: heavier than RSVP MX
COP location: about the center of the pen mod

Materials

Pentel HGG DX (grip)
Pentel RSVP (body, cap, 2 grips)
Uni-Ball Signo (metal tip)

Construction

1. Remove the clip from the RSVP cap.
2. Take a RSVP grip, soap/alcohol/oil it and shove it ALL the way back into the RSVP cap.
3. Reverse the ink tube.
4. Put an insert in the RSVP barrel.
5. Remove the HGG DX grip.
6. Remove Signo metal tip.
7. Cut part of the plastic RSVP tip until there is about 2mm of plastic before the grip.
8. Screw Signo tip right onto the cut RSVP tip.
9. Slide HGG DX grip over the metal tip and some of the RSVP grip so the DX grip covers the flat part of the Signo tip.

Source

Categories:

Menowa* mod

Credits go to Menowa* for making the mod.
This was written by AfroSquared
Images go to Froggy and some other random person.

Pen List:
x2 Old Supertips
x1 Bic Round Stic
x2 Dr Grip Tips
x2 Airblanc Tips
x2 Black Color Twin Caps
x1 Pink Anyball
x1 Skyblue Anyball
x2 Black Anyballs
x3 Penwish Black Rings
x1 HyperJell Grip

Equipment List:
G3 Rubber-Stopper (To hollw out caps optional)
Drill (to hollow out caps optional)
White Tap
Utility Knife

1. First Prepare the body. Cut each Old Supertip to approximately 6cm-7cm in length. Cut down the Bic Round Stick Barrel to 4cm - 6cm (optional length) and put a Black Penwsih Ring in the outside. Then put each end of the supertip in the cut down Bic Round Stick. Then put the two other Black Rings on the ned of each side. The Body is done.

2. Hollow out the black CT caps. You can hollow it out by using a drill or something to poke it through (G3 Rubber Stopper can be used). Once hollowed, get some White tape and make a tape cut with it. The white tape should have been cut with a Utility Knife into little strips beforehand. Simply, place them onto the caps.

4. Cut 1cm off of a HyperJell Grip and cut the 1cm piece into 2 to make two 0.5cm grips. Put one of the cut hyperjell grips AROUND the other to make one whole 0.5 cm grip. 

5. Place the new 0.5cm HyperJell grip around the Airblanc tip and place the Airblanc tip into the Dr Grip Tip. The grip of the HyperJell should be visible.

6. Place the tip package inverted into the hollowed out CT caps. 

7. To keep the tips inverted, put the black, skyball and pink anyballs on the caps. Cut 1 ring of the coloured anyball then 2 rings then cut 1 ring and 2 rings of the black anyball and replaced with the coloured anyball. Place the grips on the caps.

Categories:

Fusion mod

Fusion mod replica by Vôre-Tèx

Categories:

Alva G3

Categories:

Saturn mod

Categories:

Menowa mod

Categories:

Classic RSVP mod

Stats

Length: 18.5 cm
Weight: ~ 12.6 grams
Style: single-sided, non-retractable

Materials

Pentel RSVP
Pentel Hybrid Gel Grip (HGG)
Insert for the barrel (your own or someone elses)
Eraser for removing writing on the RSVP barrel
X-acto knife or some other tool for poking the back cap
Sand paper or a lighter
Optional - Teflon tape to wrap around the RSVP tip

Construction

1. Take the RSVP. Remove the cap, back plug, grip and ink tube.
2. Remove the clip of the cap and use the sandpaper/ lighter to round off the stub.
3. Poke a hole in the back plug, stick the ink tube in reversed, place back onto the RSVP barrel.
4. Stick the RSVP grip inside the cap to add weight to the back.
   • Important: put the grip in far enough so that the edge of the cap goes at least 1~2mm past the back plug when placed on the pen. This greatly reduces the chances of breaking the pen, without any noticeable change in how the pen spin.
5. Take the HGG. Remove the tip and grip.
6. Screw the metal HGG tip onto the plastic RSVP tip.
   • (Optional). Wrap teflon tape around the plastic RSVP tip before putting on the metal HGG tip. This will help hold the metal tip, but is not needed.
7. Slide the HGG grip over the tip and front of the RSVP barrel to replace the missing RSVP grip. The grip may not align perfectly with the metal tip, but the grip will stretch with some use.
8. The RSVP MX is now spinnable.
9. Use an eraser to rub off the writing on the RSVP barrel.
   • The fine size ink with Silver writing is much easier to remove than the medium size ink with Gold writing.
   • (Tip). To reduce the chances of scratching the barrel, you can dip the eraser in rubbing alcohol or water. This will take longer to erase, but it will keep your pen cleaner.
10. Design or download an insert online, print it.
    • Insert dimensions for RSVP barrel insert: 8.8 cm x 3.81 cm
    • The height of the insert is twice the size that is needed, this is only to help in rolling the insert.
11. Once an insert is printed, take out the back plug and ink tube from the RSVP. Roll the insert using the ink tube and slide it into the barrel.
12. Once in, use the ink tube to adjust the position if the insert gets misaligned.
13. Replace the ink tube and back plug.

Source

Categories: